|
|
|
|
- Bluetooth 4.2 & 5.0 Low Energy Module, 2.4GHz
- TI CC2640R2F ARM® Cortex®-M3 industry standard chip
- Can connect two Bluetooth devices at the same time
- Support Host-Client role
- Designed with PCB integrated antenna, suitable for SMD
- Size: 115,94 mm^2
- Metal cover against EMI interference
- Transmitting, Receiving, Wake-up by only two UART pins
- Control by AT commands: Products could be fast and easily connected with the smartphones and all kinds of Bluetooth devices
- Access Port
- serial port monitoring tool for Windows
- Standard Generic Attribute Profile (GATT)
- Operating temperature: -40°C to +85°C
|
| Artikel |
Bezeichnung 1 |
Bezeichnung 2 |
Beschreibung |
| PZBX1000 |
Bluetooth Low Energy BLE 4.2 & 5.0 Module |
with integrated internal Antenna, 2.4GHz, UART Interface |
- |
|
- Bluetooth 4.2 & 5.0 Low Energy Module, 2.4GHz
- Breakout Board Design
- TI CC2640R2F ARM® Cortex®-M3 industry standard chip
- Can connect two Bluetooth devices at the same time
- Support Host-Client role
- Designed with PCB integrated antenna, suitable for SMD
- Size: 115,94 mm^2
- Metal cover against EMI interference
- Transmitting, Receiving, Wake-up by only two UART pins
- Control by AT commands: Developers can use a simple AT command MCU and then connect products to the BLE device and smartphone
- Access Port
- serial port monitoring tool for Windows
- Standard Generic Attribute Profile (GATT)
- Operating temperature: -40°C to +85°C
|
| Artikel |
Bezeichnung 1 |
Bezeichnung 2 |
Beschreibung |
| PZBX1001 |
Bluetooth Low Energy BLE 4.2 & 5.0 Module & Breakout Board |
with integrated internal Antenna, 2.4GHz, UART Interface |
- |
|
|
|
|
|
|
|
- Ultra Low Power WiFi & Bluetooth 5.0 UART & SPI Interface Module with integrated Antenna, 2.4GHz
- Compliant to single-spatial stream IEEE 802.11 b/g/n and Bluetooth 5.0
- Co-existence of multiple wireless protocols managed by an internal protocol arbitration manager
- Leading edge RF performance providing long range and higher throughputs
- Transmit power up to +21 dBm with integrated PA
- WiFi receive sensitivity as low as -98,5 dBm
- Bluetooth receive sensitivity as low as -95 dBm
- Ultra-low power consumption with multiple power modes to reduce the system energy consumption
- Power Input range: 2,1 to 3,6V
- Support for Client mode, Access point mode, WiFi Direct and enterprise security
- Support for concurrent WiFi, Bluetooth 5.0
- 8,9 mA transmit current in Bluetooth 5.0 mode, 2 Mbps data rate
- Operating temperature: -40°C to +85°C
|
| Artikel |
Bezeichnung 1 |
Bezeichnung 2 |
Beschreibung |
| PZWX1301 |
WiFi IEEE802.11b/g/n & Bluetooth 5.0 Module |
with integrated Antenna, 2.4GHz, UART & SPI Interface |
- |
|
- Ultra Low Power WiFi / Bluetooth 5.0 UART Interface Module with integrated Antenna, 2.4GHz
- Breakout Board Design
- Compliant to single-spatial stream IEEE 802.11 b/g/n and Bluetooth 5.0
- Co-existence of multiple wireless protocols managed by an internal protocol arbitration manager
- Leading edge RF performance providing long range and higher throughputs
- Transmit power up to +21 dBm with integrated PA
- Support for 20 / 40 MHz channel bandwidths
- WiFi receive sensitivity as low as -98,5 dBm
- Bluetooth receive sensitivity as low as -95 dBm
- Ultra-low power consumption with multiple power modes to reduce the system energy consumption
- Power Input range: 2,1 to 3,6V
- Support for Client mode, Access point mode, WiFi Direct and enterprise security
- Support for concurrent WiFi, Bluetooth 5.0
- 8,9 mA transmit current in Bluetooth 5.0 mode, 2 Mbps data rate
- Operating temperature: -40°C to +85°C
|
| Artikel |
Bezeichnung 1 |
Bezeichnung 2 |
Beschreibung |
| PZWX1302 |
WiFi IEEE802.11b/g/n & Bluetooth 5.0 Module & Breakout Board
|
with integrated Antenna, 2.4GHz, UART & SPI Interface |
- |
|
|
|
|
Bluetooth GNSS Module im Gehäuse
|
|
- Elemente des Bluetooth GNSS-Moduls: GNSS-Empfängereinheit (GRU), Bluetooth-Einheit (BTU), Stromversorgung des Moduls & Backup-Versorgung des Moduls bei Ausfall der Stromversorgung
- Zwischen den beiden Elementen BTU und GRU befindet sich eine bidirektionale Datenverbindung, die auf der UART-Kommunikation basiert
- Überträgt Positionierungsdaten (von GRU zu BTU) sowie Konfigurationsdaten, A-GPS-Daten und RTCM
- Korrekturdaten (von BTU zu GRU)
- GNSS-Empfänger: µ-blox M8N, M8P, ZED-F9P oder ZED-F9R
- Externe Schnittstellen: 1x USB-B 2.0 IN & 1x SMA (für GNSS-Antenne)
- Pufferzeiten über SuperCap: 2,5 bis 4 Minuten
- Interne Schnittstellen: 2x Micro USB-B
- Zwei Statusanzeige-LEDs für Bluetooth & Power (optional LED 3 für GPS)
- Optional: USB-C Splitterkabel, AC/DC Netzteil, Montageplatte & Basisplatte mit Kugelkopf für die Montage an einem externen LEX L11 Craddle
- Abmessungen: 64,8 x 28 x 57,1 mm (B x H x L)
|
| Artikel |
Bezeichnung 1 |
Bezeichnung 2 |
Beschreibung |
| PZGE5000 |
Bluetooth GNSS Module (BGM) - u-blox M8N |
with easy pairing solution for PGMS OBUs |
- |
| PZGE5050 |
Bluetooth GNSS Module (BGM) - u-blox M8P |
with easy pairing solution for PGMS OBUs |
- |
| PZGE5100 |
Bluetooth GNSS Module (BGM) - u-blox ZED-F9P |
with easy pairing solution for PGMS OBUs |
- |
| PZGE5110 |
Bluetooth GNSS Module (BGM) - u-blox ZED-F9R |
with easy pairing solution for PGMS OBUs |
- |
