| Single Pair Ethernet SPE: Overarching key technology for Ethernet via only one pair of copper wires |
|
 |
Single Pair Ethernet (SPE) provides the necessary infrastructure for the Industrial Internet of Things (IIoT). With SPE, Ethernet can communicate from the cloud to the field level in a space- and cost-efficient way for the first time.
Single Pair Ethernet (SPE) describes the transmission of Ethernet via only one pair of copper wires. In addition to data transmission via Ethernet, SPE also enables simultaneous power supply to end devices via Power over Data Line (PoDL, up to 60W). Until now, two pairs of copper wires were necessary for Fast Ethernet (100MB) or four pairs of copper wires for Gigabit Ethernet. SPE now opens up completely new possibilities and fields of application for industrial Ethernet.
The transmission rates are sufficient even for sophisticated sensor components: 10Mbit/s at a transmission length of 1.000m (shielded), 1Gbit/s at a transmission length of 40m (shielded). Components such as scanners and cameras can be integrated throughout the Ethernet network - for example, for monitoring purposes or for detecting the type and position of a component. The realizable response times even allow TSN (Time-Sensitive Networking) applications.
For different purposes, DELTA COMPONENTS offers you a selection of USB to SPE adapters for evaluation, development and productive use:
 |
|
PZUI1018 - USB to 10BASE-T1L Stick |
|
- 10BASE-T1L physical interface with UTP connector
- High-Speed USB 2.0 device interface with Type-A connector
- Compact and modular design
- MS-Windows and Linux compatible
- Standard Ethernet Network device on host PC
|
 |
|
PZUI1022 - USB to 10BASE-T1L Stick Raw for Industrial SPE |
|
- High-Speed USB 2.0 device interface with Type-A connector
- Compact and modular design
- MS-Windows and Linux Raw-Ethernet device
- USB Bulk data In/Out to Ethernet Layer2
- ADI ADIN1100 register access
|
 |
|
PZUI1019 - USB to 100BASE-T Stick for Automotive SPE |
|
- High-Speed USB 2.0 device interface with Type-A connector
- Compact and modular design
- MS-Windows and Linux compatible
- Standard Ethernet Network device on host PC
- USB CDC/ECM driver for MS-Windows
- NXP TJA1101 register access
|
 |
|
PZUI1021 - USB to 100BASE-T Stick Raw for Automotive SPE |
|
- High-Speed USB 2.0 device interface with Type-A connector
- MS-Windows and Linux compatible
- USB Bulk data In/Out to Ethernet Layer2
- NXP TJA1101 register access
|
 |
|
PZUI1023 - USB to SMI/SPI-Adapter |
|
- SMI/SPI Access using Standard Pin-Connector
- High-Speed USB 2.0 device interface
- USB 2.0 Micro-AB connector
- Compact hardware module connecting MS-Windows and Linux based host PCs with NXP automotive Ethernet evaluation boards
- SMI and SPI connectivity via standard 2,54mm 18-pin header
- SMI Clause-22/Clause-45 on 3-wires
- SPI connections using MISO/MOSI and Clock/VDD REF
|
 |
|
 |
| Block Diagram |
|
Simple Peer-to-Peer |
Ordering Information
| PZUI1018 | USB to 10BASE-T1L Stick for Industrial Single Pair Ethernet (SPE)
USB-A connector / 3pol. PTR Schraubanschluss | | NEW! |
| PZUI1022 | USB to 10BASE-T1L Stick Raw for Industrial Single Pair Ethernet (SPE)
USB-A connector / 3pol. PTR Schraubanschluss | | NEW! |
| PZUI1019 | USB to 100BASE-T Stick for Automotive Single Pair Ethernet (SPE)
USB-A connector / 3pol. PTR Schraubanschluss | | NEW! |
| PZUI1021 | USB to 100BASE-T Stick Raw for Automotive Single Pair Ethernet (SPE)
USB-A connector / 3pol. PTR Schraubanschluss | | NEW! |
| PZUI1023 | USB to SMI/SPI-Adapter
USB Micro-AB/ SMI-und SPI-Connector über 2,54 mm 18-Pin-Header | | NEW! |
For further information, images and data sheets, please visit the relevant product pages:
|
